METHODOLOGY OF JUSTIFICATION THE TYPE AND EVALUATION OF QUALITY GROUP SEARCH OF DEFECTS IN THE REPAIR RADIO-ELECTRONIC MEANS
DOI:
https://doi.org/10.15588/1607-3274-2019-1-2Keywords:
radio-electronic means, group search of defects, restoration of working capacity, diagnostic support.Abstract
Context. Radioelectronic devices are continuously complicated, which complicates the process of restoring their efficiency, when the diagnosis consumes the largest labor costs and time. Therefore, the promising direction of increasing the efficiency of the renewal of modern electronic means is to improve diagnostic support.
Objective. The purpose of the article is to increase the efficiency of diagnostic provision of radio electronic means at the expense of a reasonable choice of the type of group search of defects.
Method. In the work analytical studies of conditional algorithms of diagnosis with the use of graph theory theory, probability theory and the theory of discrete search – a scientific discipline that studies the diagnostic process when restoring the efficiency of complex technical objects with varying degrees of damage through research and optimization of procedures and algorithms for detection of a priori – in unknown number of elements with given properties on the finite structurally-bounded set according to some criterion.
Results. The method of choosing the type of algorithm of group search of defects at given restrictions and assumptions on the criterion of minimum labor costs on the basis of generalization of the graph-analytical model of group search of defects with quantitative estimation of probabilistic, time and cost indicators of the quality of the process of diagnosing radioelectronic devices with different degree of damage, which allows to pre-substantiate the most appropriate algorithm for group defects search for use in the development of diagnostic support for modern radio ectronic means.
Conclusions. For the first time, various types of group search of defects with a quantitative estimation of the efficiency of their use depending on the features of radio-electronic means and the conditions for their restoration of efficiency are considered in a complex way.
References
Yerohіn V. F., Raevs’kij V. M. Prognozuvannja osnovnih
harakteristik perspektivnih radіostancіj silovih struktur,
Zv’jazok, 2005, No. 3, pp. 61–64.
Kononov V., Ryzhov Ye., Sakovych L. Dependence of
parameters of repair of military communication means on
the quality of metrological support, Advanced Information
Systems, 2018, Vol. 2, No. 1, pp. 91–95. DOI:
https://doi.org/10.20998/2522-9052.2018.1.17.
Czichos H. Handbook of Technical Diagnostics:
Fundamentals and Application to Structures and Systems,
, P. 559. DOI: https://doi.org/10.1007/978-3-642-
-3.
Ksenz S. P., Poltarzhickij M. I., Alekseev S. P.,
Mineev V. V. Bor’ba s diagnosticheskimi oshibkami pri
tehnicheskom obsluzhivanii i remonte sistem upravlenija
svjazi i navigacii. Sanktpiterburg, VAS, 2010, 240 p.
Pasini G., Lorenzo P., Tinarelli Roberto Study of the
Accuracy Requirements of the Instrumentation for
Efficiency Measurements in Power Conversion Systems,
IEEE Transactions on Instrumentation and Measurement,
July, 2013, Vol. 62, Issue 8, P. 2154–2160. DOI:
http://dx.doi.org/10.1109/TIM.2013.2264864.
Jack R., Nicholas P. E. Mastering the Maintenance Process,
IMC-2004 The 19th International Maintenance Conference.
Romanovich Zh. A., Skrjabin V. A., Fadeev V. P.,
Cypin B. V. Diagnostirovanie, remont i tehnicheskoe
obsluzhivanie sistem upravlenija bytovyh mashin i priborov.
Mosсow, Dashkov i K, 2014, 316 p.
Ryzhov Ye., Sakovych L., Vankevych P., Yakovlev M.,
Nastishin Y. Optimization of requirements for measuring
instruments at metrological service of communication tools.
Measurement, Journal of the International Measurement
Confederetion, Volume 123, (July 2018), pp. 19–25. DOI:
https://doi.org/10.1016/j.measurement.2018.03.055.
Timofiejczuk A. Advances in Technical Diagnostics:
Proceedings of the 6th International Congress on Technical
Diagnostic, ICDT 2016, 12–16 September 2016, Gliwice,
Poland, 521 p.
Ryzhakov V. A., Sakovich L. N. Gruppovoj zonnyj poisk
kratnyh defektov pri remonte tehniki svjazi, Zv’jazok, 2005,
No. 1, pp. 57–60.
Sakovich L. N., Ryzhakov V. A. Sovmestnyj gruppovoj
poisk kratnyh defektov pri remonte tehniki svjazi, Zv’jazok,
, No. 2, pp. 59–62.
Halderman J. Diagnosis and Troubleshooting of Automotive
Electrical, Electronic, and Computer Systems (6th Edition)
(Pearson Automotive Series), 2014, 720 p.
Bell D. Electronic Devices and Circuits. Oxford University
Press, Fifth Edition, 2008, 1092 p.
Hughes J. Practical Electronics, Components and
Techniques. Publisher, O’Reilly Media, Inc., 2015, 560 p.
Sakovich L. N., Vansovich Ju. P. Kolichestvennaja ocenka
dostovernosti diagnostirovanija pri ustranenii avarijnyh
povrezhdenij tehniki svjazi, Zv’jazok, 2010, No. 2, pp. 47–
Ryzhov E. V., Sakovich L. M. Metod obґruntuvannja
mіnіmal’no pripustimogo znachennja jmovіrnostі ocіnki
rezul’tatu perevіrki parametrіv. Vіsnik Nacіonal’nogo
tehnіchnogo unіversitetu Ukraїni “Kiїvs’kij polіtehnіchnij
іnstitut”, Serіja PRILADOBUDUVANNJa, 2017, Vip. 54(2).
pp. 96–106. DOI:
https://doi.org/10.20535/1970.54(2).2017.119562.
Kononov V. B., Vodolozhko O. V., Koval’ O. V. Osnovi
ekspluatacії zasobіv vimіrjuval’noї tehnіki vіjs’kovogo
priznachennja v umovah provedennja ATO, navch. posіb.
Harkiv, HNUPS, 2017, 288 p.
Sakovich L. M., Ryzhov E. V. Metodika predvaritel’noj
defektacii apparatnyh svjazi s mnozhestvennymi
povrezhdenijami v polevyh uslovijah. Vіsnik Nacіonal’nogo
tehnіchnogo unіversitetu Ukraїni “Kiїvs’kij polіtehnіchnij
іnstitut”. Serіja PRILADOBUDUVANNJa, 2017, Vip.
(1), pp. 32–38. DOI:
http://dx.doi.org/10.20535/1970.53(1).2017.106580.
Khandpur R. S. Troubleshooting electronic equipment:
Includes Repair And Maintenance. Second Edition,
McGraw-Hill Education (India) Private Limited, 2003,
p.
Downloads
How to Cite
Issue
Section
License
Copyright (c) 2019 V. P. Romanenko, L. N. Sakovich, Y. V. Ryzhov, S. E. Gnatyuk, I. Y. Rozum
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Creative Commons Licensing Notifications in the Copyright Notices
The journal allows the authors to hold the copyright without restrictions and to retain publishing rights without restrictions.
The journal allows readers to read, download, copy, distribute, print, search, or link to the full texts of its articles.
The journal allows to reuse and remixing of its content, in accordance with a Creative Commons license СС BY -SA.
Authors who publish with this journal agree to the following terms:
-
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License CC BY-SA that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
-
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
-
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
