UNIFIED BASIC SOFTWARE AND HARDWARE COMPLEX FOR PRECISION ENERGY-SAVING SYSTEMS OF AUTOMATIC REGULATION AND CONTROL

Authors

  • G. I. Kaniuk Ukrainian Engineering and Pedagogics Academy, Kharkiv, Ukraine
  • A. Yu. Mezeria Ukrainian Engineering and Pedagogics Academy, Kharkiv, Ukraine
  • V. N. Knіazіeva Ukrainian Engineering and Pedagogics Academy, Kharkiv, Ukraine
  • D. M. Кhoroshun Ukrainian Engineering and Pedagogics Academy, Kharkiv, Ukraine
  • T. N. Fursova Ukrainian Engineering and Pedagogics Academy, Kharkiv, Ukraine

DOI:

https://doi.org/10.15588/1607-3274-2019-2-21

Keywords:

unification, electro-hydraulic drives, automatic control systems, precision, operation speed, control algorithms.

Abstract

Context. Methods for the synthesis of precision electro-hydraulic control systems using the principle of multiplication are
proposed. Use of the principle of multiplication allows to create compact control systems of technological objects, having high rates
of precision and operation speed.
The problem of creating the unified basic software and hardware complex for precision automatic control systems and control of
an optional technological object is considered.
On the basis of effective methods of the modern theory of optimal control, control algorithms have been developed that provide
maximum compensation for all types of statistical and dynamic control errors.
Objective. The urgency of the work is due to the need to improve the precision of control systems of technological objects and
the development of software and hardware complex for these systems.
Method. We have used the methods of optimal control, methods of structural synthesis. To confirm the validity of the developed
models and principles, the method of experimental studies based on the operating equipment of test benches was used. To debug an experimental model of a basic software and hardware complex for testing the plain bearings of internal combustion engines, mathematical simulation of an electro-hydraulic drive was used. For the synthesis of a precision controller, the multiplication method was used.
Results. A number of standard sizes of high-speed precision EHSS based on part-turn hydraulic motors with a torque moment of
up to 40 kNm were developed, providing reproduction in the tracking mode of specified input effects with a bandwidth of up to 20
Hz, positioning accuracy of up to one angular minute and a control range of up to 104. Based on developed EHSS automated
simulation dynamic stands were created and brought to practical use for testing mobile object guidance systems (Customer-Central
Research Institute of Chemistry and Mechanics, Moscow) and the semi-axes transmission (Customer-JSC “КАМАZ”, Naberezhnye
Chelny). Based on the results of the research, a basic software and hardware complex for testing equipment of agricultural,
automotive and other industries was created. The high-speed precision regulator for controlling the position of steam turbine actuator valves has been synthesized to compensate for all the main types of static and dynamic errors and more than double the performance compared to the base variant while maintaining acceptable stability margins (the results are used in promising projects of the State Energy Company “Centrenergo”, National Nuclear Energy Generating Company “Energoatom”, as well as in the Institute of Control Problems of the National Academy of Sciences of Ukraine.
Conclusions. The practical engineering methods for the synthesis of effective control laws of precision electro-hydraulic systems
are proposed, as well as a number of effective regulators providing high characteristics of precision and operation speed. The
principle of multiplicative control is proposed which allows to synthesize effective control algorithms for individual, autonomous,
fully controlled and observable electro-hydraulic servo drive circuits based on third-order mathematical models. For selected
autonomous control loops, effective control laws are obtained based on modal control methods and solving inverse problems of
dynamics.
The proposed synthesis techniques are considered using the harmonic linearization method, the real nonlinear characteristics of
the control signal power limitation, which allows determining the real rational ratios of the regulator parameters and real limiting
precision and speed indicators, as well as preventing unwanted auto-oscillatory modes in the systems. In order to reduce the number of measured parameters used in the formation of the proposed control laws, on the basis of the well-known general principles of the synthesis of observing identification devices, the universal structures and formulas for calculating the parameters of standard models of autonomous control circuits of the EHSS were obtained. The method of autonomous testing and debugging of the EHSS control system using the electronic simulator of electro-hydraulic actuator has been improved which makes it possible to significantly reduce the time and cost involved in creating and engineering development a complex system.

Author Biographies

G. I. Kaniuk, Ukrainian Engineering and Pedagogics Academy, Kharkiv

Dr. Sc., Professor, Head of the Department of Heat and Power Engineering and Energy Saving Technologies

A. Yu. Mezeria, Ukrainian Engineering and Pedagogics Academy, Kharkiv

PhD, Associate Professor, Associate Professor of the Department of Heat and Power Engineering
and Energy Saving Technologies

V. N. Knіazіeva, Ukrainian Engineering and Pedagogics Academy, Kharkiv

Post-graduate student of the Department of Heat and Power Engineering and Energy Saving
Technologies

D. M. Кhoroshun, Ukrainian Engineering and Pedagogics Academy, Kharkiv

Post-graduate student of the department of heat and Power Engineering and Energy Saving
Technologies

T. N. Fursova, Ukrainian Engineering and Pedagogics Academy, Kharkiv

PhD, Associate Professor, Associate Professor of the Department of Heat and Power Engineering
and Energy Saving Technologies

References

Kaniuk G. I. High-speed precision electrohydraulic servo systems (ECGS). Fundamentals of the theory. Development. Research.

Monograph. Kharkov, Publishing house “Point”, 2008, 108 р.

Kaniuk G. I., Osadchiy A. Kh., Katykhin K. N., A.N. Shuvanov and et al. Basic program-technical complex for control of

electrohydraulic drives of test stands, Bulletin of Science and Technology. Kharkov, 1997, Issue 2, P. 15–18.

Titarenko V. B. Increasing the energy efficiency of volume hydraulic drives, Young Scientist, 2017, No. 51, pp. 97–99.

Johnson J. Engineering Essentials: Electrohydraulic Motion Control. Hydraulics & Pneumatics. Jan 01, 2012

https://www.hydraulicspneumatics.com/200/FPE/SystemDesign/Art icle/False/6463/FPE-SystemDesign

Walters R. B. Hydraulic and Electric-Hydraulic Control Systems. Springer Science+Business Media B.V., 2000. ISBN 978-94-015-

-5

Banyai, D. Vaida, L. Electro-hydraulic Control System For Variable Displacement Machines 12th International Conference “Automation in Production Planning and Manufacturing”, Zilina, 2011.

Watton J. Electrohydraulic Control System: Principles Of Operation, Circuit Analysis & Design. 2016. ISBN 978-87-403-1187-7

Eker İ. Robust governor design for hydro turbines using a multivariable-cascade control approach. The Arabian Journal for

Science and Engineering, 2003, Vol. 28, Nо. 28.

Astrom K. J., Hagglund T. Advanced PID control. SA, The Instrumentation, Systems, and Automation Society, 2006, 460 p.

URL: https://www.twirpx.com/file/162015/ (data zvernennya: 10.04.2016).

Severin V. P., Nikulina E. N. Vector target functions for optimizating the quality indicators of automatic regulation systems,

The Bulletin of the National Technical University “Kharkiv Polytechnic Institute”. Kharkiv, Issue 55, 2005, pp. 139–144.

Guillermo J. Silva, Aniruddha, Datta, & S. P. Bhattacharyya New Results on the Synthesis of PID Controllers, IEEE transactions on automatic control, Vol. 47, Nо. 2, February 2002. URL:https://wenku.baidu.com/view/a4e2c3619b6648d7c1c74632.html

(data zvernennya: 10.04.2016).

Leva A., Cox C., & Ruano A. Hands-on PID autotuning: a guide to better utilization. IFAC Professional Brief. URL: http://www.ifaccontrol. org (data zvernennya: 10.04.2016).

Eker İ. Robust governor design for hydro turbines using a multivariable-cascade control approach. The Arabian Journal for

Science and Engineering, 2003, Vol. 28, Nо. 28.

Stasiuk A. I., Goncharova L. L. Mathematical models and methods of analyzing computer networks for controlling the power supply of railways, Cybernetics and Systems Analysis, 2018, Vol. 54, No. 1, pp. 184–192.

Artiukh S. F., Kaniuk G. I., Mezeria A. Yu., Popov M. A., Bliznichenko E. N. Efficient energy-saving control of electrohydraulic servo systems. Monograph. Kharkov, Izd. “Point”, 2012, 120 p. ISBN 978-617-669-019-1

Downloads

Published

2019-05-28

How to Cite

Kaniuk, G. I., Mezeria, A. Y., Knіazіeva V. N., Кhoroshun D. M., & Fursova, T. N. (2019). UNIFIED BASIC SOFTWARE AND HARDWARE COMPLEX FOR PRECISION ENERGY-SAVING SYSTEMS OF AUTOMATIC REGULATION AND CONTROL. Radio Electronics, Computer Science, Control, (2), 202–209. https://doi.org/10.15588/1607-3274-2019-2-21

Issue

Section

Control in technical systems