ANALYSIS OF THE CHARACTERISTICS OF CYCLIC SYNCHRONIZATION SYSTEMS WITH THE USE OF THE PTP PROTOCOL (IEEE1588v2)

Authors

  • Yu. Yu. Kolyadenko Kharkiv National University of Radio Electronics, Kharkov, Ukraine
  • I. S. Shostko Kharkiv National University of Radio Electronics, Kharkov, Ukraine
  • D. V. Ageev Kharkiv National University of Radio Electronics, Kharkov, Ukraine

DOI:

https://doi.org/10.15588/1607-3274-2019-3-11

Keywords:

PTP synchronization technology, synchronization characteristics analysis

Abstract

Context. The article presents the results of the analysis of synchronization characteristics in the networks of the new generation
using the PTP protocol. The object of the research is the synchronization process in the networks of the new generation using the
PTP protocol (IEEE1588v2). The purpose of this work is to analyze the characteristics of synchronization in the networks of the new
generation using the PTP protocol.
Method. The main causes of frame alignment failures are out of synchronism. This leads to a change in the cycle duration, since
one or several clock intervals will appear in the cycle, or the clock symbols will become distorted as a result of interference. In this
case, an important characteristic of the synchronization system is the average retention time. A set of synchronization characteristics
in the networks of the new generation using the PTP protocol is proposed: the average retention time of frame alignment; average
time to fill the drive to get out of sync; the average time of filling the drive at the entrance to synchronism and the average time of
searching for a sync group.
Results. The analysis of the proposed synchronization characteristics in the networks of the new generation using the PTP protocol
has been carried out. A study was made of the dependence of the average cycle hold time for a non-adaptive receiver of a cyclic
clock signal on the probability of distortion of a single symbol in the group path. A study was conducted of the dependence of the
average filling time of a drive for sync matching from the capacity of the drive for sync matching. A study was made of the dependence
of the average drive fill time on an entry into synchronism for a non-adaptive receiver of a cyclic sync signal on the probability
of distortion of a single symbol in a group path. A study was made of the dependence of the average search time of a sync group for a
non-adaptive receiver of a cyclic sync signal on the length of a code combination of a sync group. A study was made of the dependence
of the average sync group search time for a non-adaptive receiver of a cyclic sync signal on the number of symbols between two
sync signals.
Conclusions. Conducted studies of the characteristics of synchronization allow us to make recommendations on the application
of the PTP protocol in specific practical situations. Prospects for further research may lie in the development of sync code words.

Author Biographies

Yu. Yu. Kolyadenko, Kharkiv National University of Radio Electronics, Kharkov

Dr. Sc, Professor, Professor of the Department of Information and Communication Engineering

I. S. Shostko, Kharkiv National University of Radio Electronics, Kharkov

Dr. Sc, Professor, Professor of the Department of Information and Communication Engineering

D. V. Ageev, Kharkiv National University of Radio Electronics, Kharkov

Dr. Sc, Professor, Professor of the Department of Information and Communication Engineering

References

Mills D. L., Levine J., Schmidt R., Plonka D. Coping with overload on the Network Time Protocol public servers, Proc.

Precision Time and Time Interval (PTTI), Applications and Planning Meeting, Washington, 25 december 2004: proceedings.

Washington, 2004, pp. 5–16.

Mills D.L. Computer Network Time Synchronization: the Network Time Protocol, University of Delaware: Published

by CRC Press, 2006, 304 р.

Definitions and terminology for synchronization networks, Recommendation ITU-T G.810, 1996.

Borovkov A., Schassberger R. Ergodicity of a polling network, Stoch. Proc. Appl., 1994, Vol. 50, pp. 253–262.

Winands E., Adan I., Houtum G. J. Mean value analysis for polling systems, Queueing Systems, 2006, Vol. 54, pp. 45–54.

Boon M., Mei R., Winands E. Applications of polling systems, Surveys in Operations Research and Management Science,

, Vol. 16, No. 2, pp. 67–82.

Liskov B. Practical uses of synchronized clocks in distributed systems, Proceedings of the 10th Annual ACM Symposium

on Principles of Distributed Computing, Montreal 18–20 april 1991: proceedings. Montreal, 1991, pp. 1–9.

Lamport L. Time, clocks and the ordering of events in a distributed system, Commun. ACM, 1978, No. 21(7), pp. 558–565.

Mills D. L. Internet time synchronization: the Network Time Protocol, IEEE Trans. Commun., COM-39, 1991, No. 10, pp. 1482–1493.

Timing characteristics of primary reference clocks. Recommendation ITU-T G.811, 1997.

Chavan A., Nagurvalli S., Jain M., Chaudhari S. Implementation of FPGA-Based Network Synchronization Using IEEE 1588 Precision Time Protocol (PTP), Recent Findings in Intelligent Computing Techniques. Advances in Intelligent Systems and Computing, 2018, No. 708, pp. 137–143.

Laine T. New synchronization metrics for packet networks:thesis ... doctor of philosophy, Espoo, Faculty of Electronics,

Communications and Automation of Aalto University, 2010, 92 р.

Published

2019-10-01

How to Cite

Kolyadenko, Y. Y., Shostko, I. S., & Ageev, D. V. (2019). ANALYSIS OF THE CHARACTERISTICS OF CYCLIC SYNCHRONIZATION SYSTEMS WITH THE USE OF THE PTP PROTOCOL (IEEE1588v2). Radio Electronics, Computer Science, Control, (3), 99–107. https://doi.org/10.15588/1607-3274-2019-3-11

Issue

Section

Progressive information technologies