RADIO ENGINEERING SYSTEM IDENTIFICATION OF METALS ON THE BASIS OF EDDY-CURRENT CONVERTERS

Authors

  • A. О. Abramovych National Technical University of Ukraine “Kyiv Polytechnic Institute named Igor Sikorsky”, Kyiv, Ukraine
  • Y. S. Agalidi National Technical University of Ukraine “Kyiv Polytechnic Institute named Igor Sikorsky”, Kyiv, Ukraine
  • V. O. Piddubnyi National Technical University of Ukraine “Kyiv Polytechnic Institute named Igor Sikorsky”, Kyiv, Ukraine

DOI:

https://doi.org/10.15588/1607-3274-2020-1-1

Keywords:

Eddy current transducer, metal control objects, metal identification.

Abstract

Context. The task of creating a radio system (RS) for identifying metals in the middle of subgroups of magnetic and nonmagnetic metals based on eddy current devices (ECD) is considered. The object of study is the radio identification system.

Objective. Development of a radio system that allows you to expand the possibilities of ECP by identifying a metal in a subset of non-magnetic (copper, gold, silver, etc.) and magnetic (steel, nickel) materials.

Method. A block diagram of the RS, which uses the processing of ECD signals in the time and spectral regions, is proposed. PC allows to identify the type of metal from which the control object (CO) is made, within the subsets of non-magnetic and magnetic materials, which allows to increase the probability of detecting CO hidden in a dielectric medium, made of non-ferrous, precious or ferrous metals.

The validity of the results obtained from the verification of the technique was tested on a laboratory model of the PC, which consists of an analog eddy current part and a microcontroller with ADC to transfer data to a laptop, which implements the methods of signal processing. The article proposes the hypothesis of an informative parameter and a mathematical model that explains the causes of the signal and its form. The possibility of using RS to solve the problem of metal identification within a subset of non-magnetic and magnetic materials has been experimentally confirmed.

Conclusions. Experimental studies carried out confirmed the efficiency of the proposed RS and the methods for processing the ECP signal, the software that implements it, which allows us to recommend it for the development of devices for identifying the metal from which the test object is made. Prospects for further research are to adapt mathematical and software not only to the base of metal images, but also to create images of complex objects, which will make it possible to identify a hidden metal object and thereby expand its capabilities.

Author Biographies

A. О. Abramovych, National Technical University of Ukraine “Kyiv Polytechnic Institute named Igor Sikorsky”, Kyiv

Post-graduate student, Department of Radio Engineering Devices and Systems

Y. S. Agalidi, National Technical University of Ukraine “Kyiv Polytechnic Institute named Igor Sikorsky”, Kyiv

PhD, Scientific Employee of the Department of Radio Engineering Devices and Systems

V. O. Piddubnyi, National Technical University of Ukraine “Kyiv Polytechnic Institute named Igor Sikorsky”, Kyiv

PhD, Associate Professor of the Department of Radio Engineering Devices and Systems

References

Abramovych A. O., Diachenko S. M. Metal detectors, Bulletin of the National Technical University of Ukraine “Kyiv Polytechnic Institute” Series – Radio Engineering. Radio equipment construction, 2011, No. 46, pp. 186–193.

Jol M. H. Ground Penetrating Radar Theory and Applications. Oxford GB., Elsevier B. V., 2009, 574 р. ISBN: 978-0-44453348-7.

Ivashov S. I., Makarenkov V. I., Razevig V. V., Sablin V. N., Sheyko A. P., Vasiliev I. A. Remote Control Mine Detection System with GPR and Metal Detector, Eight International Conference on Ground-Penetrating Radar, GPR’2000, University of Queensland, Gold Coast, Queensland, Australia, 2000, pp. 36– 39.

Obiazi A. M. Anyasi F. I., Jacdonmi O. О. Iplementing a Robust Metal Detector Utilizing the Colpitts Oscillator with Toroidal Coil, Journal of Engineering and Applied Sciences, 2010, 5(2), pp. 56 – 63.

Nerazrushayushchiy kontrol’ [Tekst]: u 5-ti t. Pod red. V. V. Sukhorukova. Moscow, Vyssh. shk., Vol. 3, 1992, 312 p.

Svatoš Jakub Advanced Instrumentation for Polyharmonic Metal Detectors: Ph.D Thesis: Svatoš, Jakub. Prague, 2015. 121 p.

Claudio Bruschini A multidisciplinary analysis of frequency domain metal detectors for humanitarian demining: Thesis to obtain degree of Doctor in Applied Sciences: Claudio Bruschini. Brussels, 2002, 242 p.

Abramovych A. O., Mrachkovsky O. D., Furmanchuk V. Yu. Dichotomic degradation of metal to black-color by spectral analysis, Bulletin of the Zhytomyr State Technological University. Ser: Technical Science, 2017, No. 1 (79). pp. 48–51.

Abramovych A. O., Poddubny V. O. Application of spectral analysis for distinguishing metals by signals from eddy current converters, The East European Journal of Advanced Technology, Kharkiv, 2017, Vol. 89 (No. 5), pp. 51–57 (Scopus) DOI: https://doi.org/10.15587/1729-4061.2017.110177

Abramovych A. O., Poddubny V. O., Kashirsky I. S. Method of processing of reflected signals eddy-current pulse converters, Scientific Bulletin of Zaporizhzhya National Technical University, Radioelektronika, Informatics, Management, Zaporizhzhia, 2017, №4, pp. 7–14. (Scopus) DOI: https://doi.org/10.15588/1607-3274-2017-4-1

Abramovych A. O., Poddubny V. O., Kashirsky I. S. Remote vibration current analysis of metal objects composition, International scientific and technical journal “Metallophysics and the latest technologies”. Kyiv, 2017, Vol. 39, No. 8, pp. 1035– 1049. (Scopus) URL: http://mfint.imp.kiev.ua/ua/abstract/v39/i08/1035.html

Tittse U., Shenk K. Poluprovodnikovaya skhemotekhnika: Spravochnoe rukovodstvo. Moscow, Mir, 1982, 512 p.

Daniels D. J. Ground Penetrating Radar (2nd Edition). London, UK.: Institution of Electrical Engineers, 2004, 761 p. ISBN O 86341 360.

Kunts K.S. Chislennyiy analiz. Moscow, Tehnika, 1964, 389 p.

Gantmaher F. R. Teoriya matrits. Moscow, Nauka, 1967, 575 p.

CRS Handbook of Chemistry and Physsics, 87th Edition / Ed. D. R. Lide. Taylor & Francis, CRC Press, 2007, pp. 9–17.

Abramovych A. O., Kashirsky I. S., Piddubniy V. O., Abramovych A. O. Method of graphical images in radiodetermination systems of near-neighbor locations, Materials international scientific and technical conference “Radio engineering fields, signals and systems”". Kyiv, 2018, pp. 173-175.

Prata Stiven Yazyk programmirovaniya C++. Lektsii i uprazhneniya. Stiven Prata, Vil’yams, 2012, 1248 p. ISBN 9785-8459-1778-2

Glinchenko A. S. Tsifrovaya obrabotka signalov: Ucheb. posobie: V 2 ch. Ch. 2. Krasnoyarsk, IPTs KGTU, 2001, 184 p.

Rumshiskiy L. Z. Matematicheskaya obrabotka rezul’tatov eksperimenta. Moscow, Nauka, Glav. red. Fiz-mat. lit., 1971, 192 p.

Ihamouten A., Derobert X., Villain G. Electromagnetic dispersion estimated from multi-offset, ground-penetrating radar, IEEE Ground Penetrating Radar (GPR), 2010, pp. 1–6.

Ivashov S. I., Makarenkov V. I., Razevig V. V., Sablin V. N., Sheyko A. P., Vasiliev I. A. Wide-Span Systems of Mine Detection, Mine Identification Novelties Euroconference. Villa Agape, Firenze – Italy, 1999, pp. 137–141.

Capineri L. J., Ivashov S. I. Comparison of GPR Sensor Types for Landmine Detection and Classification, 12th International Conference on Ground Penetrating Radar, Birmingham,UK, 2008, pp. 1–10.

Kang W., Kim C., Kim J., Park S., Cho S., Son J., Kim K. A study of antenna configuration for bistatic ground-penetrating radar, 2016 16th International Conference on Ground Penetrating Radar (GPR 2016). Institute of Electrical and Electronics Engineers (IEEE). Proceedings of a meeting held 13–16 June 2016. Hong Kong, pp. 552–556. ISBN 9781509051823

Congedo F., Monti G., Tarricone L. Modified bowtie antenna for GPR applications, IEEE Ground Penetrating Radar (GPR), 2010 13th International Conference.

Downloads

How to Cite

Abramovych A. О., Agalidi, Y. S., & Piddubnyi, V. O. (2020). RADIO ENGINEERING SYSTEM IDENTIFICATION OF METALS ON THE BASIS OF EDDY-CURRENT CONVERTERS. Radio Electronics, Computer Science, Control, (1), 7–17. https://doi.org/10.15588/1607-3274-2020-1-1

Issue

No. 1 (2020): Radio Electronics, Computer Science, Control

Section

Radio electronics and telecommunications

License

Copyright (c) 2020 A. О. Abramovych, Y. S. Agalidi, V. O. Piddubnyi

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Creative Commons Licensing Notifications in the Copyright Notices

The journal allows the authors to hold the copyright without restrictions and to retain publishing rights without restrictions.

The journal allows readers to read, download, copy, distribute, print, search, or link to the full texts of its articles.

The journal allows to reuse and remixing of its content, in accordance with a Creative Commons license СС BY -SA.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License CC BY-SA that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.