THE CONSTRUCTING OF BIPYRAMID’S BASIS

Authors

  • A. P. Motailo Kherson National Technical University, Kherson, Ukraine, Ukraine
  • A. N. Khomchenko Petro Mohyla Black Sea State University, Mykolayiv, Ukraine, Ukraine
  • G. Ya. Tuluchenko Kherson National Technical University, Kherson, Ukraine, Ukraine

DOI:

https://doi.org/10.15588/1607-3274-2016-4-4

Keywords:

finite element method, bipyramid, trace of stiffness matrix, tetrahedral-octahedral mesh.

Abstract

The bipyramid for the first time is considered as a 6-knots finite element (FE) in the article. For the construction of her biquadratic base
two different approaches are used: matrix method and internal condensation method for the bipyramid’s base as a 7-knots Lagrange FE. The first approach allows to investigate the fundamentally possible amount of bases for FE, and second approach does not give such possibility, but it is more economical. It is shown that after satisfaction of the traditional requirements to the basic functions in FEM in the biquadratic basic functions of bipyramid as a 6-knots FE, which are built by means of the named before approaches, there are a different amount of the indefinite coefficients. These coefficients are used future for the giving of the special properties to the basic functions, which adapt them to the solving of a boundary problems with Laplace’s equation. The value of trace of stiffness matrix is chosen as a criterion for the prognostic evaluation of approximation properties of FE in bipyramid’s form. The minimization of the trace value of the stiffness matrix results in the construction of the same biquadratic base of the bipyramid at the both approaches. On the basis of the got base the borders of the possible deformations of the bipyramid’s geometrical form are analysed. It is first wellproven in theory, that FE exists, at using of that as a cell of finite-element mesh, the best accuracy is arrived at the deviation of FE geometrical form from a regular polyhedron, in this case from an octahedron. The critical value of the aspect ratio which provides the achievement of a minimum of trace of stiffness matrix for the bipyramid of the studied geometrical form is found. A calculable experiment the results of that confirm the theoretical prognosis for properties of bipyramid as FE is conducted. The found
regularities allow to suppose the expediency of application of bases with higher-order for FE in form bipyramid.

References

Алгоритм построения трехмерной адаптированной сетки для задач аэродинамики, решаемых методом конечных элементов / [Ю. А. Крашаница, А. В. Бахир, В. А. Тараненко, Ю. С. Мащенко] // Открытые информационные и компьютерные интегрированные технологии. – 2014. – № 66. – С. 105–110. 2. Greiner G. Hierarchical tetrahedral-octahedral subdivision for volume visualization / G. Greiner, R. Grosso // The Visual Computer. – 2000. – І. 16. – Р. 357–369. 3. de Bruijn H. Numerical Method for 3D Ideal Flow [Electronic resource] / Han de Bruijn – Access mode: http://hdebruijn.soo.dto.tudelft.nl/jaar2010/octaeder.pdf. 4. Мотайло А. П. Базисы шестиузлового октаэдра [Электронный ресурс] / А. П. Мотайло. – Материалы международной научно-практической конференции «Перспективные научные исследования – 2011». Серия: Математика: Прикладная математика (17–25 февраля 2011 г.). – София, Болгария. – Режим доступа: http://www.rusnauka.com/Page_ru.htm. 5. Сегерлинд Л. Применение метода конечных элементов / Л. Сегерлинд. – М. : Мир, 1979. – 392 с. 6. Шопов П. Й. Метод конденсации для задач механики несжимаемых флюидов / П.Й. Шопов // Сердика : Българско математическо списание. – 1984. – Т. 10. – С. 198–205. 7. Зенкевич О. Метод конечных элементов в технике / О. Зенкевич. – М. : Мир, 1975. – 541 с. 8. Секулович М. Метод конечных элементов / М. Секулович. – М. : Стройиздат, 1993. – 664 с. 9. Checking the Skewness // ANSYS Icepak 12.1: User’s Guide [Electronic resource]. – Access data: http://orange.engr.ucdavis.edu/ Documentation12.1/121/ICEPAK/iceug.pdf 10. ANSYS Fluent. [Electronic resource]. – Access data: https://www.sharcnet.ca/Software/Fluent6/html/udf/node1.htm 11. Несис Е. И. Методы математической физики / Е. И. Несис. – М. : Просвещение, 1977. – 199 с. 12. Мотайло А. П. О численном решении стационарной задачи теплопроводности методом конечных элементов на решетке тетраэдрально-октаэдральной структуры / А. П. Мотайло // Научные ведомости БелГУ. Математика. Физика. – 2014. – №25(196), Вып. 37. – Белгород: «НИУ БелГУ», 2014. – С. 119–127.

Downloads

How to Cite

Motailo, A. P., Khomchenko, A. N., & Tuluchenko, G. Y. (2017). THE CONSTRUCTING OF BIPYRAMID’S BASIS. Radio Electronics, Computer Science, Control, (4). https://doi.org/10.15588/1607-3274-2016-4-4

Issue

No. 4 (2016): Radio Electronics, Computer Science, Control

Section

Mathematical and computer modelling

License

Copyright (c) 2017 A. P. Motailo, A. N. Khomchenko, G. Ya. Tuluchenko

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Creative Commons Licensing Notifications in the Copyright Notices

The journal allows the authors to hold the copyright without restrictions and to retain publishing rights without restrictions.

The journal allows readers to read, download, copy, distribute, print, search, or link to the full texts of its articles.

The journal allows to reuse and remixing of its content, in accordance with a Creative Commons license СС BY -SA.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License CC BY-SA that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.